Home >> Lip Seal >> Lip Seal Materials

JM Clipper Radial Lip Shaft Seals

Mechanical Seals and Gasket Supply is our Specialty. American Seal and Packing is a leading manufacturer & distributor of mechanical seals, Grafoil, gasket material, cut gaskets and quality o-rings providing innovative solutions to mechanical seal problems. We're finding better ways to serve our customers all the time. In addition to our expanding line of industrial mechanical seals, we're updating and upgrading this web site to provide you more information about our company and our products.

JM Clipper Logo    From American Seal & Packing    Previous Page   
Standard Seals

 
Cross Section

 
Description
Stable lip seals The Type FL low cost general purpose seal is designed for rotary and reciprocating service. The all rubber lip element is integrally formed into its sealing position and self gasketed within the closed shell assembly to eliminate inner case leakage. The formed metal contour under the lip provides stability to the lip.
severe service lip seals The SlipTite (PTFE/Rubber) seal was specifically developed for severe service. It has a single lip element that combines the low friction properties of PTFE with the flexibility and durability of rubber. It is sealed into an outer metal case and engineered for intermittent pressure service up to 10 psi.

 
corrosive service lip seals The TMA-L and TMA-S seals are designed specifically for special corrosive chemical service. The Stainless Steel outer case contains a machined PTFE seal insert with or without a spring activated lip.
High Pressure lip seals The Type HP high pressure seal is a sophisticated design to handle rotary and/or reciprocating motion at high speeds and pressures over a temperature range of (-40°F to +400°F). Pressures up to 300 psi and 4,000 FPM can be handled.
The Type MP medium pressure seal is designed to handle rotary applications up to 100 psi and temperatures from -40°F to 400°F. The inner metal shell is encapsulated in fluoroelastomer.
PTFE lip seals The Clipper SlipTite is a specially designed seal that utilizes a layer of PTFE molded to the sealing lip to reduce excessive wearing on the shaft. It can handle pressure applications up to 40 psi and higher temperatures up to 350°F. The Clipper SlipTite can be utilized in applications with limited lubrication. LUP, RUP, SS, SSW, HP & MP designs can be produced.
JM Clipper Extruded seals are available in both single and dual lip types where installation of solid or rigid seals becomes difficult or impossible due to size or location.
lip seals The JM Clipper positive lip contact sheave seal provides excellent foreign matter exclusion properties while retaining bearing lubricant. These seals are used on wire rope sheaves found in overhead cranes in the steel mills; on rotary drilling rig crown and travel blocks; and on draglines, hoists and elevators. They also have application on mine car wheels, flywheels and idler wheels.
 

Other specialty seals can be custom designed to meet your specific equipment requirements.

Our Select Manufacturers

  • Flow Serve
  • Borg Warner
  • Durametallic
  • AST

Our Select Manufacturers

  • JM Clipper
  • Graftech
  • Lamons
  • Vulcan

Contact

  • Call us at: 714-361-1435
  • Fax: 714-593-9701